123.hp.com/setup - 123 HP Printer Setup Installation

Unload your new 123.hp.com printer and interface the network links without exchanging on the electrical extension. Make sure that you have unfluctuating all the subscription surpassing you turn on the power supply to stave power issues with the device. After connecting all the cables as it is instructed in 123.hp.com/setup  printer user guide, try to squint for the power sawed-off in the printer, it can be find in front left side of the printer. For firsthand support either start yack with our Printer Expects or Call us!

Quick & Easy 123 HP Printer Setup Guidance:

Unpack TURN ON the 123.hp.com/setup by Pressing Power Button. Once it turned on it start making some noise since it is initialized for the first time, After few minutes you will be finding the screen that allows you to segregate language, country/region Select there from and “Tap OK Button.”

Step 1: After Setting all these printer screen ask you to insert the cartridge. To embed the cartridge to the printer utilize the patterns on the privilege and left sides of the printer to lift the best cover. Start inserting cartridge with tri color, moreover ensure that you are inserting right cartridge as it is mentioned in the when cover. RExpel the tape that covers the electrical contacts between the ink spouts by expelling orange draw tab.

Step 2: When you load your printer cartridges, you can find the Tri colors and woebegone cartridge strikers under the lock lever. Close the lock lever thoughtfully by inserting right cartridge.

Step 3: Once it is done, your printer automatically recognizes that you have installed the genuine HP Cartridges to your printer. Also, you will be getting a message on tenancy panel where you need to printing OK to continue.

Step 4: After installing your cartridge, reload the paper in the tray. Paper can be any size (based on the printer it might vary) which is willowy for variegated paper size. Your printer recognizes and prints the page that is set on willowy slide in paper tray.

Step 5: After your page getting printed, you need to check it by putting it on the sweep glass whilom the printer cover/scanner top. Follow the instruction thoughtfully given on your user guide paper. After tent the scanner lid, printer screen will ask you to scan where you need to printing OK. After the page is scanned you will be getting a message “ALIGNMENT SUCCESSFUL” in the tenancy panel. Tab OK to continue.

Step 6: You would then be able to associate your printer to your remote association through the product that encased with the printer or independent through the printer itself.System setup may vary from printers to printers.

Step 7: Followed by this, utilization the look to “NOT NOW” and after that tap “alright” at that point for programming establishment updates.  

123 HP Print Using AirPrint Setup

1.Open the app that you want to print
2. Find the printer option, tap on the app’s share icon or tap
3. Tap or Print. If you are unsure about the printer’s option check with the user guide or help section.
4. Select the printer option and choose an AirPrint-enabled printer.
5. Choose the page that you want to print.
6. Click the print option in the upper right corner of your PC

123.hp.com setup Driver Installation Guidance

1. Connect the printer to an influence offer and switch on your printer. Connect the printer to your pc with a USB cable.
2. Windows can observe the printer and search Windows Update for the printer driver. A pop-up window is going to be prompted, choose to find and Install the driving force computer code.
3. Select Yes, Search on-line this point solely. Windows can mechanically check the Windows Update and install the driving force.
4. If the 123.hp.com/setup Printer Driver isn’t obtainable on Windows Update, then manually transfer the printer driver to the native disk.
5. The Found New Hardware Wizard window can open. Follow the wizard and opt for the driving force that you just need to put in.
6. Select your Printer model from the list and follow the on-screen directions to complete the installation.